MASTER Red Oxide Primer

MASTER Red Oxide Primer is a decent quality economical anti-corrosive primer designed for the protection of iron, steel, and other metal surfaces against rust and corrosion. This primer safeguards iron against rusting and establishes a good foundation for subsequent topcoats. MASTER Red Oxide Primer is the primer for MASTER Gloss Enamel and similar finishes.

An economical anti-corrosive primer

  • oil modified alkyd resin based
  • good adhesion
  • good anti-corrosion property
  • fast drying

BY BRUSH, ROLLER (OR) AIRLESS SPRAY

  • The paint is ready for use after thorough stirring. If necessary, add up to 5% of thinner by volume

BY COMPRESSED AIR SPRAY

  • Add up to 10 -15 % of thinner by volume

NO. OF COATS (RECOMMENDED)

  • 1 – 2 coats

THINNER

  • Master Mineral Turpentine (MAT-01)

  • It is flammable. Keep away from sources of ignition. No smoking. No welding. Protect from extremes of temperature. Store in a good ventilated room at room temperature.
  • It needs enough ventilation during application and drying.
  • In case of insufficient ventilation, wear suitable respiratory equipment. Suitable mask should be worn when sanding.
  • When applying paint, it is advisable to wear eye protection, suitable protective clothing and gloves.
  • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
  • Remove splashes from skin by using soap and water or a recognized skin cleaner.
  • It may be harmful if swallowed.
  • Keep container tightly closed and keep out of reach of children.
  • Care must be taken when transporting paint. Keep container in a secure upright position. In the event of accident, contain and collect spillage by using sand or earth.
  • Do not empty into drains or watercourses.
  • Dispose of any paint waste in accordance with the appropriate environmental quality regulations.

Related Products

SUPER UNIPRIME Etching Primer

SUPER UNIPRIME Etching Primer is a high-quality, 2 package, polyvinyl butyral resin-based primer specially designed to protect non-ferrous metal surfaces such as zinc, aluminum, copper, and galvanized iron in both exterior and interior applications. This advanced coating delivers three critical functions: (1) It etches and removes the oxide layer responsible for premature paint peeling on non-ferrous metals, (2) Creates a superior adhesion base for subsequent coatings, and (3) Provides exceptional rust and oxidation prevention, even in harsh environments. SUPER UNIPRIME Etching Primer is highly versatile and well suited for practical applications in Myanmar, including protecting non-ferrous components of automotive, industrial, residential, and commercial structures.

UPG Etching Primer Additive

This is the additive to be used with UPG High-Performance Etching Primer.

UPG High-Performance Etching Primer

UPG High-Performance Etching Primer is a premium-quality, 2 package, polyvinyl butyral resin-based primer specially designed to protect non-ferrous metal surfaces such as zinc, aluminum, copper, and galvanized iron in both exterior and interior applications. This advanced coating delivers three critical functions: (1) It etches and removes the oxide layer responsible for premature paint peeling on non-ferrous metals, (2) Creates a superior adhesion base for subsequent coatings, and (3) Provides exceptional rust and oxidation prevention, even in harsh environments. UPG High-Performance Etching Primer is highly versatile and well suited for practical applications in Myanmar, including protecting non-ferrous components of automotive, industrial, residential, and commercial structures.